45 marks
25 marks
It takes an object two seconds to move from point A to point B along the path shown in the diagram.
What is the average speed and the magnitude of the average velocity of the object?
| Average speed | Magnitude of average velocity | |
| A. | 4 + 2 \pi m s^{-1} | 6 m s^{-1} |
| B. | 4 + 2 \pi m s^{-1} | 4 + \pi m s^{-1} |
| C. | 4 + \pi m s^{-1} | 6 m s^{-1} |
| D. | 4 + \pi m s^{-1} | 4 + \pi m s^{-1} |
C.
The diagram shows two masses, M and m that are connected by a string through a pulley, where M > m. The mass of the string and the friction between the string and the pulley are negligible.
What is the acceleration of mass M?
D.
A submarine moves through a lake with a speed of 8.0 m s^{-1}. The output power of the submarine’s engine is 2.0 MW. What is the resistive force that acts on the submarine?
C.
According to Newton’s third law of motion, what is an action-reaction force pair when a person is sitting on a chair?
| Force 1 | Force 2 | |
| A. | The force exerted by the chair on the person | The force exerted by the Earth on the person |
| B. | The force exerted by the person on the Earth | The force exerted by the Earth on the person |
| C. | The force exerted by the person on the chair | The force exerted by the chair on the Earth |
| D. | The force exerted by the person on the Earth | The force exerted by the person on the chair |
B.
A stone of mass M is attached to a string and moves in a horizontal circle or radius R. It takes the stone 2 seconds to complete one revolution.
What is the work done by the centripetal force during 1 second of the stone’s motion?
A.
A block slides down a frictionless ramp from a vertical height of x.
The block arrives at the bottom of the ramp at speed v and it eventually comes to rest on a rough horizontal surface after travelling through distance s. The coefficient of dynamic friction between the block and the surface is \mu. What is s?
A.
A thermally isolated tube contains only water molecules. The tube is cooled to the freezing point of water. While the water is changing phase:
B.
The albedo of ice that covers a lake during winter is 0.75. This means that:
A.
The internal resistance of a 32 V battery is 4.0\: \Omega. A lightbulb has three times the resistance than the internal resistance of the battery. The lightbulb is connected to the battery. Which of the following statements is incorrect for the circuit?
B.
The specific heat capacity of a substance in the solid state is c and the specific latent heat of fusion of the substance is L. When 5000 J of energy is supplied to m kg of this substance in the solid state, the temperature of the substance increases by 50 K. When 20000 J of energy is supplied to \frac{m}{2} kg of this substance in the solid state at its melting point, the substance completely melts without a change in its temperature. What is the ratio \frac{c}{L}?
D.
Containers C and D contain the same ideal gas. The gas in container C is at a temperature of 500 K. The pressure in C is a third of the pressure in D. The volume of C is five times the volume of D. There are four times as many molecules in D than in C. What is the temperature in D?
A.
Two resistors, X and Y, are connected as shown on the diagram. The ammeter and the voltmeter are ideal and the cell has negligible internal resistance.
What happens to the ammeter reading and the voltmeter reading when the resistance of resistor Y is halved?
| Ammeter reading | Voltmeter reading | |
| A. | Increases | Increases |
| B. | Increases | Decreases |
| C. | Decreases | Increases |
| D. | Decreases | Decreases |
A.
A mass-spring system oscillates with simple harmonic motion (SHM). What is true about the restoring force that acts on the system?
C.
In a double-slit experiment monochromatic violet light is incident on two slits that are located at a distance d from a screen. The separation of the slits is s. The distance between consecutive dark fringes in the interference pattern that forms on the screen is a.
The experiment can be modified in the following ways:
I. Changing violet light to yellow light.
II. Decreasing d.
III. Decreasing s.
Which of these modifications will cause a to increase?
B.
The displacement of a particle in a traveling wave varies with time as shown on the graph. What are the amplitude and the frequency of the particle’s motion?
| Amplitude / nm | Frequency / MHz | |
| A. | 0.7 | 50 |
| B. | 70 | 0.05 |
| C. | 0.7 | 0.05 |
| D. | 70 | 50 |
B.
A third-harmonic standing sound wave is formed in a pipe that is open at one end and closed at the other end. The length of the pipe is 1.2 m. Point X is located 20 cm from the closed end of the pipe and point Y is located 60 cm from the closed end of the pipe. What is the phase difference between the motion of a particle at point X and the motion of a particle at point Y?
A.
The gravitational force acting between two objects is F. The mass of each object is m and the distance between the objects is x. What will be the gravitational force acting between two objects that each have a mass of 2m when the distance between them is 2x?
C.
A proton, moving with initial velocity v, enters an electric field between two parallel, horizontal plates near the surface of the Earth. The velocity of the proton does not change as it moves through the electric field. What is the direction and the best estimate for the magnitude of the electric field between the plates?
| Electric field direction between the plates | Magnitude of electric field between the plates | |
| A. | Upwards | 100 nN C^{-1} |
| B. | Upwards | 10 nN C^{-1} |
| C. | Downwards | 100 nN C^{-1} |
| D. | Downwards | 10 nN C^{-1} |
A.
A proton moves in an electric field. Which of the following paths requires the electric field to do the most work?
D.
Moon A has mass M, radius R and the gravitational field strength on the surface of Moon A is g. Moon B has mass 3M and the gravitational field strength on its surface is \frac{g}{4}.
What is the diameter of Moon B?
B.
The initial number of undecayed nuclides in a radioactive sample is N. Which graph correctly shows how N varies with time?
B.
The diagram shows a simple model of the four energy levels in an atom.
What is the best estimate for the smallest and for the largest frequency in the absorption spectrum of the atom?
| Smallest frequency in absorption spectrum | Largest frequency in absorption spectrum | |
| A. | 2.0 PHz | 6.0 PHz |
| B. | 2.0 PHz | 12 PHz |
| C. | 0.50 PHz | 6.0 PHz |
| D. | 0.50 PHz | 12 PHz |
B.
Under what temperature and density conditions does fusion take place in stars?
| Temperature | Density | |
| A. | Low | Low |
| B. | Low | High |
| C. | High | Low |
| D. | High | High |
D.
The initial activity of a radioactive sample is 160 Bq and the background activity at this location is 25% of the initial activity of the sample. The half-life of the radioactive nuclide is 7 hours.
What is the activity detected at the location of the sample after 21 hours?
C.
A moderator and control rods are two key parts of a nuclear power station. What is true about the atoms in a moderator and the atoms in control rods?
D.
20 marks
A student carries out an investigation to determine the relationship between the tension T in a wire of fixed length and the frequency f of the fundamental vibration of a standing wave on the wire.
For T = 10 N, the student measures the frequency five times and records the following values:
| f / Hz | 182 | 185 | 152 | 182 | 180 |
The student then carries out two different calculations for the mean value of f and obtains 176.2 Hz and 182 Hz.
(a) Comment on these mean values.
[2]
The graph of f against T is plotted.
(b) The uncertainty in T is \pm 5\% and the uncertainty in f is \pm 20 Hz.
(i) Draw error bars for the data point where T = 40 N.
[2]
(ii) Calculate the largest percentage uncertainty in f for these data values.
[2]
The student hypothesizes that the relationship between T and f can be described as f = A\sqrt{T} where A is a constant.
(c)
(i) Find the fundamental SI unit for A.
[2]
(ii) Write down a pair of quantities that the student can plot in order to test the hypothesis.
[1]
(iii) Using the data point where T = 10 N, determine the uncertainty in A.
[3]
The mean value 176.2 is quoted incorrectly to four significant figures. It should be quoted to three significant figures.
The outlier (152) is included in the calculation of 176.2, but not in the calculation of 182.
Coming soon!
Coming soon!
The largest percentage uncertainty occurs at the smallest value of f, so at f = 182 Hz
Calculating the percentage uncertainty for f = 182 Hz:
\frac{\Delta f}{f} = \frac{20}{182} \approx 0.11 = 11\%
Coming soon!
The fundamental SI unit of f is \textup{s}^{-1} and the fundamental SI unit of T is \textup{kg\,m\,s}^{-2}
Therefore the fundamental SI unit of A is:
\frac{\textup{s}^{-1}}{\left (\textup{kg\,m\,s}^{-2} \right )^{\frac{1}{2}}} = \textup{kg}^{-\frac{1}{2}}\, \textup{m}^{-\frac{1}{2}}
Coming soon!
f against \sqrt{T}
OR
f^{2} against T
Coming soon!
Calculating A:
A = \frac{182}{\sqrt{10}} \approx 57.6
Calculating the fractional uncertainty in A:
\frac{\Delta A}{A} = \frac{20}{182} + \frac{1}{2} \times 0.05 \approx 0.135
Calculating the uncertainty in A:
\Delta A = 57.6 \times 0.135 \approx 8
Coming soon!
A student carries out an experiment to find the internal resistance r and the electromotive force (emf) \varepsilon of a cell. The student uses a circuit to measure the terminal potential difference V and current I.
The uncertainty in the measurement of each value of I is \pm 2 mA and the uncertainty in the measurement of each value of V is \pm 0.04 V.
The data collected by the student is plotted on a graph.
(a)
(i) State and explain why no horizontal error bars are shown for the data points.
[2]
(ii) Draw the line of best fit for the data.
[1]
(b) For this investigation V = -Ir + \varepsilon.
Using the graph
(i) find the internal resistance of the cell. Give your answer together with an appropriate unit.
[3]
(ii) determine the emf of the cell along with its uncertainty and give your answer in an appropriate format.
[2]
Horizontal error bars would show the uncertainty in the current.
Since the uncertainty in the current is very small (negligible), there is no need to show error bars for the current.
The internal resistance of the cell is shown by the gradient of the line of best fit.
We can calculate this gradient using the approximate coordinates of two points on this line, so for example:
(250, 2.80) and (1240, 2.40)
We will carry out the calculations using amperes for the current.
\textup{gradient} = \frac{2.40 - 2.80}{1240 \times 10^{-3} - 250 \times 10^{-3}} \approx -0.404
Therefore r \approx 0.404\: \Omega
The emf of the cell is shown by the vertical axis intercept of the graph.
The vertical axis intercept is approximately 2.89, therefore, using the uncertainty value in V we get:
\varepsilon \approx (2.89 \pm 0.04) V